:-(
On Thu, Jan 23, 2014 at 8:36 AM, Micka <[email protected]> wrote: > Well, > > First, thx to Robert Nelson, the patch for the touchscreen fix has been > implemented : > > > https://github.com/RobertCNelson/linux-dev/commit/20c9c32e3443826d79ea01e17cbd2d6fa2c616ae > > Which means, that now, you don't need to implement it yourself :p , you > just need to build the kernel and install it in your sdcard. > > Which means that soon, the fix will be implemented to each release of > ubuntu/debian from Robert Nelson ! > > Also Will Kostelecky, the script to install the kernel, only work for a > Robert Nelson image ( ubuntu/debian ) . > > > Micka, > > > > > > On Thu, Jan 23, 2014 at 8:45 AM, Will Kostelecky < > [email protected]> wrote: > >> Everything went well up to the point of actually installing the patched >> and rebuilt kernel! I run from an SD card so had to point the install >> script to it. It installed ok on the first partition but blew up on the >> second. I have not had a chance to dig into why yet. I am thinking of >> trying the upgrade on the internal drive and see if that, being what is >> expected by default, works better? >> >> >> >> On Wed, Jan 22, 2014 at 8:39 AM, Micka <[email protected]> wrote: >> >>> I never used rebuild_deb.sh ..... I don't know what it is for ..... >>> >>> >>> On Wed, Jan 22, 2014 at 9:30 AM, Will Kostelecky < >>> [email protected]> wrote: >>> >>>> Micka: >>>> >>>> I have gotten to the point of rebuilding the kernel and have what may >>>> be a dumb question before I press enter... >>>> >>>> In tools I have a rebuild.sh and a rebuild_deb.sh. Form your message >>>> I am guessing that I run the latter? >>>> >>>> Thanks, >>>> Will >>>> >>>> >>>> On Tue, Jan 21, 2014 at 3:08 PM, André Prado <[email protected]>wrote: >>>> >>>>> Thank you so much, i will do it when i get home :) >>>>> >>>>> >>>>> On Tue, Jan 21, 2014 at 6:16 AM, Micka <[email protected]> wrote: >>>>> >>>>>> >>>>>> http://eewiki.net/display/linuxonarm/BeagleBone+Black#BeagleBoneBlack-LinuxKernel >>>>>> >>>>>> git clone git://github.com/RobertCNelson/linux-dev.git >>>>>> cd linux-dev/ >>>>>> git checkout origin/am33x-v3.8 -b tmp >>>>>> ./build_kernel.sh >>>>>> >>>>>> go to the file KERNEL/drivers/input/touchscreen/ti_am335x_tsc.c >>>>>> >>>>>> edit the file by following the file that I previously sent . >>>>>> >>>>>> save the file, go to the folder linux-dev, and rebuild the kernel : >>>>>> >>>>>> ./tools/rebuild something .sh >>>>>> >>>>>> micka, >>>>>> >>>>>> >>>>>> >>>>>> On Tue, Jan 21, 2014 at 7:00 AM, Will Kostelecky < >>>>>> [email protected]> wrote: >>>>>> >>>>>>> Micka: >>>>>>> >>>>>>> I second the huge thanks from Andre for the work you have done on >>>>>>> this to date...would also support Andre's question about the way! If >>>>>>> you >>>>>>> could give us some pointers on what we need to do, or point us to a >>>>>>> reference on the web, it would be greatly appreciated (even more greatly >>>>>>> than hugely)! >>>>>>> >>>>>>> Cheers, >>>>>>> Will >>>>>>> >>>>>>> >>>>>>> On Tue, Jan 21, 2014 at 12:10 AM, André Prado < >>>>>>> [email protected]> wrote: >>>>>>> >>>>>>>> Micka could you please give me the way? I need to get >>>>>>>> https://github.com/beagleboard linux repo and compile with Linaro? >>>>>>>> Is that all? >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> On Mon, Jan 20, 2014 at 12:08 PM, Micka <[email protected]>wrote: >>>>>>>> >>>>>>>>> I don't think so ( I'm not an expert on that ) But It's "easy" >>>>>>>>> with the Kernel from Robert Nelson to build, modify the kernel, >>>>>>>>> rebuild the >>>>>>>>> kernel, install the kernel in your sdcard .... It's what i've done >>>>>>>>> ... . >>>>>>>>> >>>>>>>>> I hope that Robert Nelson will include this modification for the >>>>>>>>> next release of the Kernel ..... >>>>>>>>> >>>>>>>>> >>>>>>>>> On Mon, Jan 20, 2014 at 2:32 PM, André Prado < >>>>>>>>> [email protected]> wrote: >>>>>>>>> >>>>>>>>>> Micka thank you so much for your work! >>>>>>>>>> We can compile this driver with Linaro and load it dynamically >>>>>>>>>> right? Using mobprobe >>>>>>>>>> >>>>>>>>>> Or am i mistaken? >>>>>>>>>> >>>>>>>>>> Cheers >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On Mon, Jan 13, 2014 at 11:58 AM, Micka <[email protected]>wrote: >>>>>>>>>> >>>>>>>>>>> I would love to create a patch for you, but i don't know how >>>>>>>>>>> .... I tried to commit the result, but I got : >>>>>>>>>>> >>>>>>>>>>> beaglekernel@beaglekernel-VirtualBox:~/linux-dev/KERNEL$ git >>>>>>>>>>> commit >>>>>>>>>>> # On branch v3.8.13-bone35 >>>>>>>>>>> # Changes not staged for commit: >>>>>>>>>>> # (use "git add <file>..." to update what will be committed) >>>>>>>>>>> # (use "git checkout -- <file>..." to discard changes in >>>>>>>>>>> working directory) >>>>>>>>>>> # >>>>>>>>>>> # modified: drivers/input/touchscreen/ti_am335x_tsc.c >>>>>>>>>>> # >>>>>>>>>>> no changes added to commit (use "git add" and/or "git commit -a") >>>>>>>>>>> beaglekernel@beaglekernel-VirtualBox:~/linux-dev/KERNEL$ git >>>>>>>>>>> commit drivers/input/touchscreen/ti_am335x_tsc.c >>>>>>>>>>> error: insufficient permission for adding an object to >>>>>>>>>>> repository database .git/objects >>>>>>>>>>> >>>>>>>>>>> error: drivers/input/touchscreen/ti_am335x_tsc.c: failed to >>>>>>>>>>> insert into database >>>>>>>>>>> error: unable to index file >>>>>>>>>>> drivers/input/touchscreen/ti_am335x_tsc.c >>>>>>>>>>> fatal: updating files failed >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On Sun, Jan 12, 2014 at 1:35 PM, Will Kostelecky < >>>>>>>>>>> [email protected]> wrote: >>>>>>>>>>> >>>>>>>>>>>> I have the same problem with the LCD7 on Archlinux and would >>>>>>>>>>>> really like to get it fixed. I can't find the above file on my >>>>>>>>>>>> installation and am not sure where to look. Or for that matter >>>>>>>>>>>> what to do >>>>>>>>>>>> with the patched file if I were able to find it. Can someone >>>>>>>>>>>> help with a) >>>>>>>>>>>> telling me where to look for the right file to patch, and b) tell >>>>>>>>>>>> me how to >>>>>>>>>>>> build a patched driver? I am not a complete neophyte with Linux >>>>>>>>>>>> (I >>>>>>>>>>>> frequently build apps from source and can debug build problems) >>>>>>>>>>>> but I dont >>>>>>>>>>>> know where to start with drivers! >>>>>>>>>>>> >>>>>>>>>>>> Thanks, >>>>>>>>>>>> Will >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> On Thursday, 9 January 2014 07:58:47 UTC, Mickae1 wrote: >>>>>>>>>>>> >>>>>>>>>>>>> Lan Kidd, For the patch, I'm sure that Robert Nelson will >>>>>>>>>>>>> include it on the next release of the kernel, same for Koen ! >>>>>>>>>>>>> >>>>>>>>>>>>> Terry Storm, well not really :) , the noise come when you >>>>>>>>>>>>> remove your finger, always at this time .... when the pressure is >>>>>>>>>>>>> not >>>>>>>>>>>>> enough we got some crazy x and y value .......... >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> On Thu, Jan 9, 2014 at 6:54 AM, Terry Storm < >>>>>>>>>>>>> [email protected]> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>>> Ditto. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Regarding the fix which makes this work 99% of the time... >>>>>>>>>>>>>> Have you considered the noise could be on the power lines >>>>>>>>>>>>>> which power the touch screen? >>>>>>>>>>>>>> One could assume the power rails are meant to be between GND >>>>>>>>>>>>>> and VCC, however this may not be the case. It then assumes GND >>>>>>>>>>>>>> is 0 and VCC >>>>>>>>>>>>>> is Max. Since there are 4 AIN's used, it should be possible to >>>>>>>>>>>>>> read the >>>>>>>>>>>>>> voltages... Maybe do some sort of ratio calculation or something. >>>>>>>>>>>>>> Just a thought. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Terry >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Thursday, 9 January 2014 07:56:11 UTC+13, Ian Kidd wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> I'm going to be the helpless little girl here and ask for a >>>>>>>>>>>>>>> quick synopsis of how to apply the patch? I'm not sure where >>>>>>>>>>>>>>> the file is >>>>>>>>>>>>>>> that gets this Diff, because I can't locate it in /lib/modules. >>>>>>>>>>>>>>> >>>>>>>>>>>>>> -- >>>>>>>>>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>>>>>>>>> --- >>>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>>> Google Groups "BeagleBoard" group. >>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>>>> it, send an email to [email protected]. >>>>>>>>>>>>>> >>>>>>>>>>>>>> For more options, visit https://groups.google.com/ >>>>>>>>>>>>>> groups/opt_out. >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>>>>>>> --- >>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>> Google Groups "BeagleBoard" group. >>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>> it, send an email to [email protected]. >>>>>>>>>>>> For more options, visit >>>>>>>>>>>> https://groups.google.com/groups/opt_out. >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>>>>>> --- >>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>> Google Groups "BeagleBoard" group. >>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>> it, send an email to [email protected]. >>>>>>>>>>> For more options, visit https://groups.google.com/groups/opt_out >>>>>>>>>>> . >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> Att >>>>>>>>>> André >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>>>>> --- >>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>> Google Groups "BeagleBoard" group. >>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>>> send an email to [email protected]. >>>>>>>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>>>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>>>> --- >>>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>> Groups "BeagleBoard" group. >>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>> send an email to [email protected]. >>>>>>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> Att >>>>>>>> André >>>>>>>> >>>>>>>> -- >>>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>>> --- >>>>>>>> You received this message because you are subscribed to a topic in >>>>>>>> the Google Groups "BeagleBoard" group. >>>>>>>> To unsubscribe from this topic, visit >>>>>>>> https://groups.google.com/d/topic/beagleboard/SXTaSUf4aSk/unsubscribe >>>>>>>> . >>>>>>>> To unsubscribe from this group and all its topics, send an email to >>>>>>>> [email protected]. >>>>>>>> >>>>>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>>>>> >>>>>>> >>>>>>> -- >>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>> --- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "BeagleBoard" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to [email protected]. >>>>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>>>> >>>>>> >>>>>> -- >>>>>> For more options, visit http://beagleboard.org/discuss >>>>>> --- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "BeagleBoard" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>> send an email to [email protected]. >>>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> Att >>>>> André >>>>> >>>>> -- >>>>> For more options, visit http://beagleboard.org/discuss >>>>> --- >>>>> You received this message because you are subscribed to a topic in the >>>>> Google Groups "BeagleBoard" group. >>>>> To unsubscribe from this topic, visit >>>>> https://groups.google.com/d/topic/beagleboard/SXTaSUf4aSk/unsubscribe. >>>>> To unsubscribe from this group and all its topics, send an email to >>>>> [email protected]. >>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>> >>>> >>>> -- >>>> For more options, visit http://beagleboard.org/discuss >>>> --- >>>> You received this message because you are subscribed to the Google >>>> Groups "BeagleBoard" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> For more options, visit https://groups.google.com/groups/opt_out. >>>> >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to a topic in the >>> Google Groups "BeagleBoard" group. >>> To unsubscribe from this topic, visit >>> https://groups.google.com/d/topic/beagleboard/SXTaSUf4aSk/unsubscribe. >>> To unsubscribe from this group and all its topics, send an email to >>> [email protected]. >>> For more options, visit https://groups.google.com/groups/opt_out. >>> >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/groups/opt_out. >> > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/SXTaSUf4aSk/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
