I am trying to boot Android (TI-JB) on to a Beaglebone Black system.
I am referencing the TI Android JB-4.2.2<http://processors.wiki.ti.com/index.php/TI-Android-JB-4.2.2-DevKit-4.1.1_DeveloperGuide> *Hardware:* - Beaglebond black Rev A5C with Angstrom loaded - 4D system resistive touch LCD cape (4DCAPE-43T<http://www.4dsystems.com.au/product/22/125/Beagle_Bone_LCD_Capes/4DCAPE_43/> ) - 5V power supply - USB connected to Host PC (Ubuntu 12.04 LTS) *Software* - Beaglebone black has the stock Angstrom Linux - uSD card has JB 4.2.2, I have built the kernel *Connections* - 5V power supply - mini-USB connected to Host PC (Ubuntu 12.04 LTS) On boot/power up I held the S2 (uSD boot) button and release the button. I was expecting the system boot from the uSD card with Android. I don't see any of the USERx LED's illuminated. Do I need to make change to the display resolutions? What am I doing wrong? Any suggestions? Attach few pictures of the hardware too . <http://e2e.ti.com/cfs-file.ashx/__key/communityserver-discussions-components-files/791/7115.IMAG0214.jpg><http://e2e.ti.com/cfs-file.ashx/__key/communityserver-discussions-components-files/791/5164.IMAG0215.jpg> I have read the following post too<http://e2e.ti.com/support/embedded/android/f/509/t/282310.aspx> . I have ordered the Serial to USB cable will post the log when available -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
