On Saturday, February 1, 2014 3:03:49 AM UTC+5:30, Mahendra Gunawardena wrote: > > @Vishveshwar > > On the 4DCAPE-43T this two jumper that need to be placed. When the both > jumpers were connected the BBB started to work. > > More information can be found > here<http://4d.websitetoolbox.com/post/boot-android-tijb-on-beaglebone-black-from-sd-card-6738480> > . >
Good to know. Thanks for the update. -Vishveshwar > > Thank you for you response. > > Mahendra > > > On Thursday, January 30, 2014 8:34:05 AM UTC-5, Mahendra Gunawardena wrote: >> >> >> I am trying to boot Android (TI-JB) on to a Beaglebone Black system. >> >> I am referencing the TI Android >> JB-4.2.2<http://processors.wiki.ti.com/index.php/TI-Android-JB-4.2.2-DevKit-4.1.1_DeveloperGuide> >> >> *Hardware:* >> >> - Beaglebond black Rev A5C with Angstrom loaded >> - 4D system resistive touch LCD cape >> (4DCAPE-43T<http://www.4dsystems.com.au/product/22/125/Beagle_Bone_LCD_Capes/4DCAPE_43/> >> ) >> - 5V power supply >> - USB connected to Host PC (Ubuntu 12.04 LTS) >> >> *Software* >> >> - Beaglebone black has the stock Angstrom Linux >> - uSD card has JB 4.2.2, I have built the kernel >> >> *Connections* >> >> - 5V power supply >> - mini-USB connected to Host PC (Ubuntu 12.04 LTS) >> >> On boot/power up I held the S2 (uSD boot) button and release the button. >> >> I was expecting the system boot from the uSD card with Android. >> >> I don't see any of the USERx LED's illuminated. >> >> Do I need to make change to the display resolutions? >> >> What am I doing wrong? >> >> Any suggestions? >> >> Attach few pictures of the hardware too >> >> . >> <http://e2e.ti.com/cfs-file.ashx/__key/communityserver-discussions-components-files/791/7115.IMAG0214.jpg><http://e2e.ti.com/cfs-file.ashx/__key/communityserver-discussions-components-files/791/5164.IMAG0215.jpg> >> >> I have read the following post >> too<http://e2e.ti.com/support/embedded/android/f/509/t/282310.aspx> >> . >> >> I have ordered the Serial to USB cable will post the log when available >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
