@Vishveshwar On the 4DCAPE-43T this two jumper that need to be placed. When the both jumpers were connected the BBB started to work.
More information can be found here<http://4d.websitetoolbox.com/post/boot-android-tijb-on-beaglebone-black-from-sd-card-6738480> . Thank you for you response. Mahendra On Thursday, January 30, 2014 8:34:05 AM UTC-5, Mahendra Gunawardena wrote: > > > I am trying to boot Android (TI-JB) on to a Beaglebone Black system. > > I am referencing the TI Android > JB-4.2.2<http://processors.wiki.ti.com/index.php/TI-Android-JB-4.2.2-DevKit-4.1.1_DeveloperGuide> > > *Hardware:* > > - Beaglebond black Rev A5C with Angstrom loaded > - 4D system resistive touch LCD cape > (4DCAPE-43T<http://www.4dsystems.com.au/product/22/125/Beagle_Bone_LCD_Capes/4DCAPE_43/> > ) > - 5V power supply > - USB connected to Host PC (Ubuntu 12.04 LTS) > > *Software* > > - Beaglebone black has the stock Angstrom Linux > - uSD card has JB 4.2.2, I have built the kernel > > *Connections* > > - 5V power supply > - mini-USB connected to Host PC (Ubuntu 12.04 LTS) > > On boot/power up I held the S2 (uSD boot) button and release the button. > > I was expecting the system boot from the uSD card with Android. > > I don't see any of the USERx LED's illuminated. > > Do I need to make change to the display resolutions? > > What am I doing wrong? > > Any suggestions? > > Attach few pictures of the hardware too > > . > <http://e2e.ti.com/cfs-file.ashx/__key/communityserver-discussions-components-files/791/7115.IMAG0214.jpg><http://e2e.ti.com/cfs-file.ashx/__key/communityserver-discussions-components-files/791/5164.IMAG0215.jpg> > > I have read the following post > too<http://e2e.ti.com/support/embedded/android/f/509/t/282310.aspx> > . > > I have ordered the Serial to USB cable will post the log when available > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
