Are you holding S2 pressed until after the board powers up? Gerald
On Fri, Mar 7, 2014 at 6:21 AM, Sam Hon <[email protected]> wrote: > > I tried to update the latest version Debian in > > http://beagleboard.org/latest-images/ > > > Download BeagleBone Black (eMMC flasher) Debian (BeagleBone Black - 2GB > eMMC) 2014-03-04 and use Image Writer to write into SD card. > > However, when pressing on S2 (boot Switch) and power on,image in SD card > isn't flashed into eMMC but BBB boots from it. > > How do I do to flash the image into BBB eMMC not boot from it. > > Will be a big different between Angostrom and Debian? because I use > Angostrom before to control LED on the board, GPIO, UART0 and so on. Those > codes remain the same or I have to modify it. > > Thanks > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
