Hi Gerald, I did hold S2 until after the board powers up. Before I updated Angstrom several times, they were all success. I didn't know where I did wrong.
My PCB is version A5C. What information should I give to make it clear and easy to debug. Thanks, On Fri, Mar 7, 2014 at 8:32 PM, Gerald Coley <[email protected]> wrote: > Are you holding S2 pressed until after the board powers up? > > Gerald > > > > On Fri, Mar 7, 2014 at 6:21 AM, Sam Hon <[email protected]> wrote: > >> >> I tried to update the latest version Debian in >> >> http://beagleboard.org/latest-images/ >> >> >> Download BeagleBone Black (eMMC flasher) Debian (BeagleBone Black - 2GB >> eMMC) 2014-03-04 and use Image Writer to write into SD card. >> >> However, when pressing on S2 (boot Switch) and power on,image in SD card >> isn't flashed into eMMC but BBB boots from it. >> >> How do I do to flash the image into BBB eMMC not boot from it. >> >> Will be a big different between Angostrom and Debian? because I use >> Angostrom before to control LED on the board, GPIO, UART0 and so on. Those >> codes remain the same or I have to modify it. >> >> Thanks >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> >> For more options, visit https://groups.google.com/d/optout. >> > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/5qcEHCsQvyE/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
