After retry several times, I found I can flash the NAND with the latest Debian. Maybe, there is something wrong over there, but I can use it now...
On Tue, Mar 11, 2014 at 11:38 AM, Sam Hon <[email protected]> wrote: > Hi Gerald, > > I did hold S2 until after the board powers up. Before I updated Angstrom > several times, they were all success. I didn't know where I did wrong. > > My PCB is version A5C. > > What information should I give to make it clear and easy to debug. > > Thanks, > > > On Fri, Mar 7, 2014 at 8:32 PM, Gerald Coley <[email protected]>wrote: > >> Are you holding S2 pressed until after the board powers up? >> >> Gerald >> >> >> >> On Fri, Mar 7, 2014 at 6:21 AM, Sam Hon <[email protected]> wrote: >> >>> >>> I tried to update the latest version Debian in >>> >>> http://beagleboard.org/latest-images/ >>> >>> >>> Download BeagleBone Black (eMMC flasher) Debian (BeagleBone Black - 2GB >>> eMMC) 2014-03-04 and use Image Writer to write into SD card. >>> >>> However, when pressing on S2 (boot Switch) and power on,image in SD card >>> isn't flashed into eMMC but BBB boots from it. >>> >>> How do I do to flash the image into BBB eMMC not boot from it. >>> >>> Will be a big different between Angostrom and Debian? because I use >>> Angostrom before to control LED on the board, GPIO, UART0 and so on. Those >>> codes remain the same or I have to modify it. >>> >>> Thanks >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to a topic in the >> Google Groups "BeagleBoard" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/beagleboard/5qcEHCsQvyE/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
