And yes, the instructions were perfectly followed for flashing. I think this might not be wrong because i have already flashed my other BBB three or four times
On Wednesday, March 26, 2014 9:24:22 PM UTC+5:30, Jones Jebaraj wrote: > > Thank you Gearald, for you timely reply.I am using a 5V Power bank to > power the board. But I think that the power supply may not be the problem > because the same does occur when I connect it via my laptop. Also I forgot > to mention that the board heats up unusually. It is worthwhile to mention > that I have another BBB which works on the same power bank without issues. > > On Wednesday, March 26, 2014 9:14:17 PM UTC+5:30, Gerald wrote: >> >> I would make sure you flash it correctly per the instructions and run it >> from the DC jack. >> >> Depending on what you have plugged in and how good the USB power source >> is, it may not power the board. >> >> Gerald >> >> >> >> On Wed, Mar 26, 2014 at 10:40 AM, Jones Jebaraj >> <[email protected]>wrote: >> >>> Hi all >>> I am a newbie to beagle bone black. My BBB is not booting. When powerd >>> with the barrel connector, only the power led is glowing.Any of the USR >>> leds does not glow. Tried to reflash the eMMC, but no change. Also the >>> board does not power up with the usb cable. Any suggestions?? >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
