Gerald, I seem to be having a problem booting any image from a uSD. I originally tried putting other distros on the bbb when purchased back in Dec. Then I decided to just flash the eMMC with Angstrom, which seems to work fine.
Now, however, I am incorporating the radium camera cape into a project and I cannot seem to boot with their modified Angstrom image, which apparently is required to be used via uSD because the cape interferes with the eMMC. Trying to boot from this and any other image produces user LED activity for about 3-5 minutes, and appears to be booting from uSD based on lights. Then suddenly without warning, the LED activity stops and the 2 middle user LEDs stay lit solid, along with the pwr light. I know this is related to power failure in other cases, but wondering if that is the same issue here? I have been using a combination of bench top and wall wart pwr supplies, all rated at 5V/2A. Any thoughts? Peter -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
