OK. Information is helpful. It helps people help you when they are crafting a response. Nice to know you have another board that works.
I would say based on the added sentences, unless you have more to tell, that the other board, the one that does not work and heats up, is damaged. I suggest you go to this link: http://www.elinux.org/Beagleboard:BeagleBoneBlack item #15 in the menu. Gerald. On Wed, Mar 26, 2014 at 10:59 AM, Jones Jebaraj < [email protected]> wrote: > And yes, the instructions were perfectly followed for flashing. I think > this might not be wrong because i have already flashed my other BBB three > or four times > > > On Wednesday, March 26, 2014 9:24:22 PM UTC+5:30, Jones Jebaraj wrote: >> >> Thank you Gearald, for you timely reply.I am using a 5V Power bank to >> power the board. But I think that the power supply may not be the problem >> because the same does occur when I connect it via my laptop. Also I forgot >> to mention that the board heats up unusually. It is worthwhile to mention >> that I have another BBB which works on the same power bank without issues. >> >> On Wednesday, March 26, 2014 9:14:17 PM UTC+5:30, Gerald wrote: >>> >>> I would make sure you flash it correctly per the instructions and run it >>> from the DC jack. >>> >>> Depending on what you have plugged in and how good the USB power source >>> is, it may not power the board. >>> >>> Gerald >>> >>> >>> >>> On Wed, Mar 26, 2014 at 10:40 AM, Jones Jebaraj >>> <[email protected]>wrote: >>> >>>> Hi all >>>> I am a newbie to beagle bone black. My BBB is not booting. When powerd >>>> with the barrel connector, only the power led is glowing.Any of the USR >>>> leds does not glow. Tried to reflash the eMMC, but no change. Also the >>>> board does not power up with the usb cable. Any suggestions?? >>>> >>>> -- >>>> For more options, visit http://beagleboard.org/discuss >>>> --- >>>> You received this message because you are subscribed to the Google >>>> Groups "BeagleBoard" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> >>> -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
