Check the support Wiki under changes. This was fixed on a later revision. Gerald
On Thu, Apr 17, 2014 at 2:58 PM, <[email protected]> wrote: > Just adding to the list. > > I am seeing this on hard boot 1/20 > > on SHUTDOWN -r I am getting even more frequent failures, closer to 1/10. > > On Wednesday, July 31, 2013 5:48:54 PM UTC-4, [email protected] wrote: > >> Hi guys, >> >> we have a problem with our Beagle Bone Black (A5C). We are using Ubuntu >> Raring 13.04 armhf v3.8.13-bone21 (2013-06-14) on the eMMC (no SD Card). >> The Beagle Bone is placed in a case and we have connected it to a DC power >> supply. Sometimes (I would say every 5 to 10 times), when we are plugging >> in our power supply, the BeagleBone powers on (Power LED is on), but >> nothing more happens (none of the other four LEDs is on). If we are now >> removing the power supply and putting it in again, the BBB starts normally. >> I guess the power supply is strong enough: 5A@5V. >> >> Thanks for your help in advance. >> >> Regards, >> duckhunter >> > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
