On Wed, May 7, 2014 at 5:02 PM, Ross Morrison <[email protected]> wrote: > Hi All, > > I've downloaded the debian-7.5 prebuilt image from > elinux.org/BeagleBoardDebian > > wget > https://rcn-ee.net/deb/rootfs/wheezy/debian-7.5-console-armhf-2014-05-06.tar.xz > > tar xf debian-7.5-console-armhf-2014-05-06.tar.xz cd > debian-7.5-console-armhf-2014-05-06 > > sudo ./setup_sdcard.sh --mmc /dev/sdc --dtb beaglebone > > I now connect my serial cable to the on board header connector on the BBB > and to my Linux workstation (USB) > > plug in a USB to Ethernet adapter to the USB type A port on the BBB > > Apply power to the 5v DC barrel jack > > I get a clean boot up, but there is no mention of any USB A port activity. > I can unplug the Ethernet adapter and plug it back in, no output to the > console. > I can plug in a USB keyboard, no output to the console indicating that the > keyboard was plugged in. > There seems to be no recognition of the USB type A port at all.
Odd, can you please pastebin.com your full serial boot log. > Any ideas? > > No, I don't want to use the built in Ethernet on the BBB. Also, how does one > get rid of the the USB gadget > components at boot up? I don't need or want the USB OTG Ethernet active or > any of the device support associated > with it. The usb-gadget driver is setup via: /opt/scripts/boot/am335x_evm.sh Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
