On 05/07/2014 03:06 PM, Robert Nelson wrote:
On Wed, May 7, 2014 at 5:02 PM, Ross Morrison <[email protected]> wrote:
Hi All,
I've downloaded the debian-7.5 prebuilt image from
elinux.org/BeagleBoardDebian
wget
https://rcn-ee.net/deb/rootfs/wheezy/debian-7.5-console-armhf-2014-05-06.tar.xz
tar xf debian-7.5-console-armhf-2014-05-06.tar.xz cd
debian-7.5-console-armhf-2014-05-06
sudo ./setup_sdcard.sh --mmc /dev/sdc --dtb beaglebone
I now connect my serial cable to the on board header connector on the BBB
and to my Linux workstation (USB)
plug in a USB to Ethernet adapter to the USB type A port on the BBB
Apply power to the 5v DC barrel jack
I get a clean boot up, but there is no mention of any USB A port activity.
I can unplug the Ethernet adapter and plug it back in, no output to the
console.
I can plug in a USB keyboard, no output to the console indicating that the
keyboard was plugged in.
There seems to be no recognition of the USB type A port at all.
Yes I can, any instructions as to Paste Name/ Title or just post it
generically to pastebin.com?
Thanks
Odd, can you please pastebin.com your full serial boot log.
Any ideas?
No, I don't want to use the built in Ethernet on the BBB. Also, how does one
get rid of the the USB gadget
components at boot up? I don't need or want the USB OTG Ethernet active or
any of the device support associated
with it.
The usb-gadget driver is setup via:
/opt/scripts/boot/am335x_evm.sh
Regards,
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
