On Wed, May 7, 2014 at 5:42 PM, Ross Morrison <[email protected]> wrote: > On 05/07/2014 03:39 PM, Robert Nelson wrote: >> >> On Wed, May 7, 2014 at 5:27 PM, Ross Morrison <[email protected]> wrote: >>> >>> On 05/07/2014 03:11 PM, Robert Nelson wrote: >>>> >>>> On Wed, May 7, 2014 at 5:02 PM, Ross Morrison <[email protected]> wrote: >>>>> >>>>> Hi All, >>>>> >>>>> I've downloaded the debian-7.5 prebuilt image from >>>>> elinux.org/BeagleBoardDebian >>>>> >>>>> wget >>>>> >>>>> >>>>> https://rcn-ee.net/deb/rootfs/wheezy/debian-7.5-console-armhf-2014-05-06.tar.xz >>>>> >>>>> tar xf debian-7.5-console-armhf-2014-05-06.tar.xz cd >>>>> debian-7.5-console-armhf-2014-05-06 >>>>> >>>>> sudo ./setup_sdcard.sh --mmc /dev/sdc --dtb beaglebone >>>> >>>> <cough> ignore my other email </cough> >>>> >>>> use: >>>> sudo ./setup_sdcard.sh --mmc /dev/sdc --uboot bone >>> >>> "specifically stated" --uboot or the "new" --dtb option, please educate >>> me >>> on the differences, thanks. >>> >>> Yes, the --uboot version does recognise the USB A port. Just need to get >>> the >>> network configured to use it now. >> >> It's a little bug in my kernel selector logic. My goal is to have one >> kernel work on everything, however to fully support the capes on the >> bone's i still need the 3.8 kernel. >> >> So right now all the "--dtb" options use a more mainline (v3.14.x >> based kernel) whereas the "--uboot bone" option selects the (v3.8.x >> based bone kernel). One big limitation of the musb driver on >> mainline(v3.14.x), so can only have one sub-device built-in. So the >> musb port on the beagle/beagle-xm/panda work, and the bone's usb port >> doesn't as you found out. >> >> Regards, >> > Thank you, I'll get it going with 3.8 for now and when needed move up to > 3.14.
You can grab a "bone" specific v3.14.x via: cd /opt/scripts/tools/ git pull sudo ./update_kernel.sh --beta-kernel (only a few small capes are supported in v3.14.x) But usb/video/ethernet is better. Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
