OK so next step is to get a serial debug interface working. Which means you may need to purchase a 3v3 compatible FTDI serial <-> usb adapter. Known working models listed on circuitco's pages I believe.
On Sun, Jun 1, 2014 at 5:39 PM, Jared Turner <[email protected]> wrote: > I was booting from uSD. I tried to download a new image but still no > change. > > On Sunday, June 1, 2014 7:21:42 PM UTC-5, William Hermans wrote: >> >> Ok, so could be that the OS image some how became corrupt. Is this on >> uSD, or eMMC ? And do you issue shutdown now -h, before pulling the power ? >> >> >> On Sun, Jun 1, 2014 at 1:43 PM, Jared Turner <[email protected]> wrote: >> >>> Ya, no change >>> >>> >>> On Sunday, June 1, 2014 3:42:47 PM UTC-5, Jesse Forgues wrote: >>> >>>> Try hitting the reset and power buttons? http://elinux.org/images/7/76/ >>>> CONN_REVA5A.jpg >>>> On Jun 1, 2014 1:34 PM, "Jared Turner" <[email protected]> wrote: >>>> >>>>> Ya, it was powering the board fine for the past 6 months. I checked >>>>> the voltage, 5.14v >>>>> >>>>> On Sunday, June 1, 2014 2:21:27 PM UTC-5, William Hermans wrote: >>>>>> >>>>>> Did you check to see if the barrel plug had correct polarities ? >>>>>> >>>>>> >>>>>> On Sun, Jun 1, 2014 at 9:59 AM, Jared Turner <[email protected]> >>>>>> wrote: >>>>>> >>>>>>> I have been trying to get my BBB to work with LinuxCNC. Everything >>>>>>> was working fine until I tried to power it up today. After I plugged it >>>>>>> in, >>>>>>> the power light didn't come on, or any other lights. Was using an AC/DC >>>>>>> converter from Adafruit, also tried usb, no luck. Is it dead? >>>>>>> >>>>>>> -- >>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>> --- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "BeagleBoard" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to [email protected]. >>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>> >>>>>> >>>>>> -- >>>>> For more options, visit http://beagleboard.org/discuss >>>>> --- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "BeagleBoard" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to [email protected]. >>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
