Hi Robert, Thanks for the quick reply. I do not fully understand. What was broken in the server and what do I need to do to fix it ? Did I download an incorrect image/flasher ? Even in that case the image which I downloaded a year ago should work ? How do I unbrick the board with the latest MLO and UBoot now ?
On Saturday, June 14, 2014 5:45:49 AM UTC-7, RobertCNelson wrote: > > On Sat, Jun 14, 2014 at 2:29 AM, <[email protected] <javascript:>> > wrote: > > I have a rev D beagleboard which I have been using for more than a year. > I > > was using the ubuntu release ubuntu-12.10-console-armhf-2013-03-28 and > the > > board had been running fine. I decided to upgrade to a new release so > that I > > could experiment some more. On a new kingston SD card I purchased,I > > installed ubuntu-14.04-console-armhf-2014-06-05 and replaced the SD > card > > but all I could see was the beagleboard orange logo. After trying it a > few > > times , I tried to put the old SD card with the ubuntu-12.10 back but I > saw > > the same thing. I suspected that somehow some configuration had been > > overwritten and so decided to use flasher (the mk_mmc script to replaced > > Uboot/env but nothing happened. I erased portions of NAND and then ended > up > > erasing the NAND on the board completely.I then tried to create another > > flasher using the command > > > > sudo ./mk_mmc.sh --mmc /dev/mmcblk0 --uboot beagle_cx > > > > using another new patriot card but all I see is the 40W message. Seems > like > > its not reading from the SD card at all. I doubt if my board connection > has > > gone bad all of a sudden. How do I debug/fix this. Any suggestions would > be > > appreciated. > > > > P.S: I tried to use fdisk on another card to create a linux disk image > > separately but then I could not figure out where to copy the latest > > MLO/Uboot from. > > Sorry about that, i "should" be working again now.. This was a server > side change, i never know when i can fully "eol" something on the > server side. > > Regards, > > -- > Robert Nelson > http://www.rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
