I have tried both with new as well as existing cards but no change in behavior. All I see is a 40W. I only see one LED light up on the board. Is there a way to get Uboot/MLO to the board through serial port perhaps without an SD card. I have even tried linux boot format using fdisk and then copying the files one by one. Thanks for your help again.
On Sunday, June 15, 2014 1:12:23 PM UTC-7, RobertCNelson wrote: > > On Sun, Jun 15, 2014 at 2:57 PM, <[email protected] <javascript:>> > wrote: > > Thanks again. I tried the new flasher but it was of no use.(mk_mmc.sh > > script). It is possibly not compatible with the new fdisk tools ? What > > solution do you recommend now in absence of mk_mmc.sh/ setup_sdcard.sh. > Here > > is the the current state of my card. I already did nand erase and cannot > get > > any prompt via the serial port/USB but the 40W message only if user > button > > is pressed. Do I need to format the sdcard manually and use new > MLO/Uboot > > images. > > Where is the path to those. ? > > "40W" means the bootloader never got installed, or the partition was > not setup correct. > > So retry: "ubuntu-12.10-console-armhf-2013-03-28" with setup_sdcard.sh > > > Once I get to use UBoot, which stable release do you recommend with it. > I do > > not care about the gui but just want to be able to get to a prompt. > > Okay, if you don't care about a gui, just use this one: > > http://elinux.org/BeagleBoardUbuntu#BeagleBoard_xM > > It'll work just fine on the classic beagle. > > Regards, > > -- > Robert Nelson > http://www.rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
