On Fri, Oct 24, 2014 at 9:47 AM, Dennis Cote <[email protected]> wrote: > I tried to flash my BBB rev A5C with the 2014-10-22 Debian Jessie lxqt > flasher from > http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#2014-10-22. The > flashing never completed, at least the user LEDs never changed from the > cylon flashing pattern. I left the board run overnight. I have attached a > log from the serial debug port. > > Just in case the flasher had worked even though it never completed, I tried > booting from the eMMC. This started but dropped out to a shell. I have also > attached a log from the serial console for that boot. > > My BBB correctly boots and runs the 2014-10-22 standalone lxde image from > the same site using a different SD card. > > I verified the md5sum of the image file I downloaded. > > Any idea why the flasher fails? Has anyone else used this flasher > successfully?
Odd.. ----------------------------- Copying: /dev/mmcblk0p1 -> /dev/mmcblk1p1 rsync: /boot/uboot/ -> /tmp/boot/ Copying: /dev/mmcblk0p2 -> /dev/mmcblk1p2 [ 585.521293] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) rsync: / -> /tmp/rootfs/ Give it another run, it should only take about 10 minutes.. I should find a switch for a progress bar in rsync.. Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
