Hi All, I connected a rechargeable Li+ battery to my BBB TP5, TP6, TP7, and TP8. I shorted TP5 and TP6 and added a 10uF decoupling capacitor. In addition, I connected TS to GND with a 9K resistor which is 10K || 75K according to the datasheet and the board boots fine from battery. Now my question is that how can I monitor the battery status(how much they are charged) or change the setting of PMIC, TPS65127C from shell. For instance, I would like to set the charging voltage to 4.2 rather than the default 4.1V. Or I would like to turn on/off WLED etc. Is there a tool, like Alsamixer, for this? if not what would be the best approach for controlling PMIC from shell? I posted it here because PMIC uses I2C interface to talk to AM335x.
<https://lh4.googleusercontent.com/-E-wdJPfnG5U/VHPNaDDU9WI/AAAAAAAAAAo/tEjegAyAzAM/s1600/bbb-batt-srm.jpg> <https://lh3.googleusercontent.com/-d7FQ9BVS6J4/VHPNtiSxI4I/AAAAAAAAAAw/3_g2aL5Q2K4/s1600/bbb-batt1.jpg> Thanks for your time and consideration. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
