Thanks Robert, I got: [ 4117.989952] bone-capemgr bone_capemgr.9: slot #12: Requesting firmware 'myoverlay-00A0.dtbo' for board-name 'Override Board Name', version '00A0' [ 4117.990270] bone-capemgr bone_capemgr.9: slot #12: dtbo 'myoverlay-00A0.dtbo' loaded; converting to live tree [ 4117.991239] bone-capemgr bone_capemgr.9: slot #12: myoverlay conflict P9.31 (#5:BB-BONELT-HDMI) [ 4118.000630] bone-capemgr bone_capemgr.9: slot #12: Failed verification
so I guess I need to take out the HDMI or use different pins On Tuesday, December 9, 2014 7:33:15 PM UTC-5, RobertCNelson wrote: > > On Tue, Dec 9, 2014 at 6:28 PM, Pete Douma <[email protected] <javascript:>> > wrote: > > I am learning the whole overlay thing so please bear with me. In order > to > > enable the pru with your overlay, I assume you have to do > > echo myoverlay > /sys/devices/bone_capemgr.9slots > > > > is this correct? When I do it I get write error File exists. What should > I > > be doing? > > For this interface, when you "error file exists" run "dmesg | tail" > and it'll actually tell you something! ;) > > Regards, > > -- > Robert Nelson > http://www.rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
