Hi Raj;
While others may disagree, I use ONLY class 10 uSD cards. However your real problem is that you are trying to use a Windows machine to read a Linux for matted memory device! Only the boot partition is FAT formatted. Just put the uSD card in your BBB and it should work fine ….. Bill "No one could make a greater mistake than he who did nothing because he could do only a little." "All that is necessary for the triumph of evil is that good men do nothing" Edmond Burke (1729 - 1797) http://www.packtpub.com/building-a-home-security-system-with-beaglebone/book http://ca.linkedin.com/pub/bill-pretty/2b/b07/602 From: [email protected] [mailto:[email protected]] On Behalf Of Raj_RB Sent: Sunday, January 18, 2015 5:53 AM To: [email protected] Subject: [beagleboard] microSD card format & Image installing issue Hi guys, I am having very hard time with my microSD card (4GB, Transcend, Class 2) for the past several days. I am using Windows 7 and I formatted this card using FAT and also FAT32. Then using Win32 disk image installer, I installed Debian 7.7 eMMC flasher for BBB (Jan 6, 2015 release) in the card. After successful writing, I safely removed the card and inserted it again in the PC (using card reader) to check the files, immediately an pop up flashed asking to format the card. Also, I could not see the card size in 'My computer'.I have done this process earlier and it worked well (display of files) but I dont know why it doesnot work well. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
