Thanks Robert! Have to get a cable now. On Sun, Jan 18, 2015 at 11:52 PM, Robert Nelson <[email protected]> wrote:
> On Sun, Jan 18, 2015 at 4:18 PM, Raj Bharath RB <[email protected]> > wrote: > > Hi Robert, > > > > Actually, as said by you, I downloaded the image BBB Rev C (4GB eMMC) > > (Flasher: lxde: (1.7GB Free on 4GB eMMC)) in the link > > http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#2014-12-31 as I > use BBB > > Rev C. I verified the Md5 to be the same. > > > > Then I installed the image in 4GB card using Win32 image installer and > found > > everything normal. I also removed the card and inserted in my PC and > found > > the files with total size of the card to be 95.7 MB and free space to be > > 34MB. I think until this point, everything is ok. > > > > Next is I inserted the card in BBB, and then supplied power (only through > > adapter) while pressing the boot button until a moment after all the LEDs > > glowed. Then it seemed that all LEDs glowed randomly but within 10 > seconds, > > only the 3rd LED (D4) from RESET button is lit throught (many minutes) > and > > not the other LEDs. > > I again pressed the power button till the BBB shuts down and removed the > > power and did the same process again. But the same thing happened. > > > > I waited for ten minutes of flashingand then I shut down BBB and removed > the > > card and connected the BBB with my PC through USB and tried to so SSH > with > > putty. But it displayed the error stating the connection timed out. > > > > Please help me find a solution for this! Thank you. > > Connect either the HDMI or usb-serial ftdi cable, it'll report what's > wrong on both screens'.. > > Regards, > > -- > Robert Nelson > http://www.rcn-ee.com/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/1g8Tnh8wmfU/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
