On Sun, Jan 18, 2015 at 4:18 PM, Raj Bharath RB <[email protected]> wrote: > Hi Robert, > > Actually, as said by you, I downloaded the image BBB Rev C (4GB eMMC) > (Flasher: lxde: (1.7GB Free on 4GB eMMC)) in the link > http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#2014-12-31 as I use BBB > Rev C. I verified the Md5 to be the same. > > Then I installed the image in 4GB card using Win32 image installer and found > everything normal. I also removed the card and inserted in my PC and found > the files with total size of the card to be 95.7 MB and free space to be > 34MB. I think until this point, everything is ok. > > Next is I inserted the card in BBB, and then supplied power (only through > adapter) while pressing the boot button until a moment after all the LEDs > glowed. Then it seemed that all LEDs glowed randomly but within 10 seconds, > only the 3rd LED (D4) from RESET button is lit throught (many minutes) and > not the other LEDs. > I again pressed the power button till the BBB shuts down and removed the > power and did the same process again. But the same thing happened. > > I waited for ten minutes of flashingand then I shut down BBB and removed the > card and connected the BBB with my PC through USB and tried to so SSH with > putty. But it displayed the error stating the connection timed out. > > Please help me find a solution for this! Thank you.
Connect either the HDMI or usb-serial ftdi cable, it'll report what's wrong on both screens'.. Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
