On Mon, Feb 2, 2015 at 8:10 AM, Robert Nelson <[email protected]> wrote: > On Mon, Feb 2, 2015 at 7:21 AM, Alexander Holler <[email protected]> wrote: >> >>>> Nothing shows up on the USB bus, so prime suspect would be an updated >>>> kext, >>>> I will be able to compare the version number from 10.10 & 10.9 later >>>> today. >>> >>> >>> With 10.10, Apple requires "signed" kext's.. So depending on the 10.9 >>> kext, you might have to enable "kext-dev-mode=1" in your apple >>> bootargs. >> >> >> Is that kext necessary for the cdc-driver (or usb-storage) too? I've read >> the cdc-driver is part of the system, so it should be already signed. > > It should only affect the usb-ethernet (RNDIS). > > usb-storage & cdc-serial are built-in.. > > https://www.kernel.org/doc/Documentation/usb/gadget_multi.txt > > A CDC ECM (Ethernet) function may be turned on via a Kconfig option > and RNDIS can be turned off. If they are both enabled the gadget will > have two configurations -- one with RNDIS and another with CDC ECM[3]. > > In 3.8: > > CONFIG_USB_G_MULTI=m > CONFIG_USB_G_MULTI_RNDIS=y > # CONFIG_USB_G_MULTI_CDC is not set > > in 3.14.x: > > CONFIG_USB_G_MULTI=m > CONFIG_USB_G_MULTI_RNDIS=y > CONFIG_USB_G_MULTI_CDC=y > > Wish i wasn't going on vacation in 24 hours... Anyone want to rebuild > v3.8.x and with CONFIG_USB_G_MULTI_CDC and see if they can just get > 10.10 (i still need to upgrade my hackintosh) working with just > cdc-ether?
Scratch that, my "jessie" build has v3.14.x with that configuration, so no rush to rebuild.. Flasher: http://rcn-ee.net/rootfs/bb.org/testing/2015-02-01/lxqt-4gb/BBB-eMMC-flasher-debian-jessie-lxqt-4gb-armhf-2015-02-01-4gb.img.xz microSD: http://rcn-ee.net/rootfs/bb.org/testing/2015-02-01/lxqt-4gb/bone-debian-jessie-lxqt-4gb-armhf-2015-02-01-4gb.img.xz Can someone with 10.10 test these out (without HoRNDIS installed) and see if cdc-ether works out of the box? Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
