most of thread that I saw, use the U-Boot to write in the EEPROM .... but from what I can see, the UBOOT stop working after :
U-Boot SPL 2013.10-00016-g6adb529 (Feb 06 2014 - 14:54:24) Incorrect magic number (0xffffffff) in EEPROM Could not get board ID. Incorrect magic number (0xffffffff) in EEPROM Could not get board ID. Unknown board, cannot configure pinmux.### ERROR ### Please RESET the board ### Le mer. 6 mai 2015 à 17:07, Micka <[email protected]> a écrit : > Sorry, we finally found what was wrong, the SD support was not correctly > connected ..... . > > Now, we have this message on the UART 1: > > U-Boot SPL 2013.10-00016-g6adb529 (Feb 06 2014 - 14:54:24) > Incorrect magic number (0xffffffff) in EEPROM > Could not get board ID. > Incorrect magic number (0xffffffff) in EEPROM > Could not get board ID. > Unknown board, cannot configure pinmux.### ERROR ### Please RESET the > board ### > > I'm going to search how to write to the EEPROM .... > > > Le mer. 6 mai 2015 à 15:21, Gerald Coley <[email protected]> a > écrit : > >> What do you have your boot order set to? >> >> Gerald >> >> >> On Wed, May 6, 2015 at 7:24 AM, Micka <[email protected]> wrote: >> >>> Hi, >>> >>> We just received our first prototype of a clone from the BeagleBoneBlack. >>> For the moment it print CCCCCCCCCCCCCCCCC....... >>> >>> I tried to put a SDCard ( working on the official BeagleBone black ) but >>> nothing happen on the boot, I still have the CCCCCCCC ...... >>> >>> >>> Do I need to do something before ? Like using the nand-flash-writer from >>> TI ? >>> >>> >>> Micka, >>> >> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> >> >> -- >> Gerald >> >> [email protected] >> http://beagleboard.org/ >> http://circuitco.com/support/ >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
