Thx for the answer. Now the boot work as I wanted. And Linux boot without problem ... . For the moment, the only thing that I can't make it work is the Ethernet ..... :'( ....... . For some reason, it doesn't work and no led switch on :
[ 40.459276] net eth0: initializing cpsw version 1.12 (0) [ 40.463124] net eth0: phy found : id is : 0x7c0f1 [ 40.463154] libphy: PHY 4a101000.mdio:01 not found [ 40.474550] net eth0: phy 4a101000.mdio:01 not found on slave 1 [ 40.495647] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready It was the same result with the starterware etherecho example. time to put the scope ! Le mer. 6 mai 2015 à 21:48, Robert Nelson <[email protected]> a écrit : > On Wed, May 6, 2015 at 2:36 PM, Micka <[email protected]> wrote: > > It's almost a 100% clone, expect that we removed the eMMC. Normally this > > shouldn't be a problem Because I've disabled the eMMC in a config file. > > > > so far : > > UART 1 working, > > user led working, > > I2C 0 working ( because i'm able to read the EEPROM with Code Composer > > studio + BoardInfoRead function in the eeprom.c > > > > https://github.com/RobertCNelson/Bootloader-Builder/blob/master/patches/v2015.04/0002-NFM-Production-eeprom-assume-device-is-BeagleBone-Bl.patch > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
