I don't think that I said that.
I gave you some thinking material to think about.
But I did miss saying "transistor/resistor circuit", the circuit
disappeared between the brain and the fingers.
Chad
On 5/7/15 12:12 PM, claudiu [email protected] wrote:
This is the sensor hcsr04 datasheet:
http://www.micropik.com/PDF/HCSR04.pdf
vol = 5V;
cur = 15mA;
As Chad said if I will attach a resistor between the the sensor echo
and BBB will perform the level shift accordingly.Thus, as I previously
mention I have attached a 1kohm resistor between the sensor pin echo
and BBB so I could convert the voltage to the BBB expected 3.3V, as
far as my calculations showed with a 1KOHM resistor.
But will be the sensor satisfied if I have plug it in the VDD_5V from
the BBB?
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google
Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to [email protected]
<mailto:[email protected]>.
For more options, visit https://groups.google.com/d/optout.
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
