Yes. There is a cape for adding memory and a NOR module. http://elinux.org/Beagleboard:BeagleBone_Capes
Gerald On Fri, Jun 26, 2015 at 3:33 AM, mohit hada <[email protected]> wrote: > Read all the post as BBB instead of Beagle Bone Please. Thanks for > patience. > > > On Friday, 26 June 2015 13:24:36 UTC+5:30, mohit hada wrote: >> >> Hi, >> >> >> Can I do GPMC XIP parallel NOR boot using Beagle Bone by using the >> expansion headers of the beagle bone and making my own custom board for NOR >> / OTP Flash and check it. >> >> >> What can be the probable issues which I can face in doing this as most of >> the header signals are shared on BBB? When I discussed this on TI >> community, I received a reply that eMMC chip in that case needs to be >> removed. Is it essential to Remove eMMC. Can't it be erased and then >> hardware lines used in parallel? Can other shared lines used on the >> expander head for GPMC also create problem. >> >> >> I want to use MUX1 or MUX2 XIP Boot Mode, 16 bit Address Data >> Multiplexed, with an OTP / Parallel NOR Flash booting. >> >> >> Kindly help as this will help me to reduce m design time and cost to a >> minimum. >> >> >> Regards. >> > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- Gerald [email protected] http://beagleboard.org/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
