More so, I want to configure all bare metal using starterware... On Fri, Jun 26, 2015 at 7:40 PM, mohit hada <[email protected]> wrote:
> Hi, > > By changing the SYSBOOT configuration on the hardware of BBB, Booting will > start from GPMC is what I know but will the physical connections of eMMC > cause any trouble still at electrical level? Or NOT ..... once the SYSBOOT > is reconfigured, things should work perfectly if the custom board is fine > is it what you mean? > > The reason I repeat is TI people, BISER from sitaraware informed me that > eMMC card should be removed anyhow. > > I will be more than happy if it works... > > On Fri, Jun 26, 2015 at 7:34 PM, Gerald Coley <[email protected]> > wrote: > >> Device Tree. It is what sets up the pin mux function of all the pins. You >> will need to reconfigure the pins to support the module instead of the >> onboard eMMC. >> >> Gerald >> ] >> >> On Fri, Jun 26, 2015 at 9:01 AM, mohit hada <[email protected]> wrote: >> >>> What is DT File? Please do not mind my ignorance. >>> >>> Regards. >>> >>> On Fri, Jun 26, 2015 at 7:27 PM, Gerald Coley <[email protected]> >>> wrote: >>> >>>> It will work with either one. The BBB needs to have the DT file set to >>>> disable the eMMC. >>>> >>>> Gerald >>>> >>>> >>>> On Fri, Jun 26, 2015 at 8:30 AM, mohit hada <[email protected]> >>>> wrote: >>>> >>>>> Hi Gerald, >>>>> >>>>> Thanks for the reply. But can it be used with BBB or only with BB >>>>> White? >>>>> >>>>> I have BBB and not BB White but I want to add something of this sort >>>>> on it. >>>>> >>>>> Regards. >>>>> >>>>> On Fri, Jun 26, 2015 at 6:46 PM, Gerald Coley <[email protected]> >>>>> wrote: >>>>> >>>>>> Yes. There is a cape for adding memory and a NOR module. >>>>>> http://elinux.org/Beagleboard:BeagleBone_Capes >>>>>> >>>>>> >>>>>> Gerald >>>>>> >>>>>> On Fri, Jun 26, 2015 at 3:33 AM, mohit hada <[email protected]> >>>>>> wrote: >>>>>> >>>>>>> Read all the post as BBB instead of Beagle Bone Please. Thanks for >>>>>>> patience. >>>>>>> >>>>>>> >>>>>>> On Friday, 26 June 2015 13:24:36 UTC+5:30, mohit hada wrote: >>>>>>>> >>>>>>>> Hi, >>>>>>>> >>>>>>>> >>>>>>>> Can I do GPMC XIP parallel NOR boot using Beagle Bone by using the >>>>>>>> expansion headers of the beagle bone and making my own custom board >>>>>>>> for NOR >>>>>>>> / OTP Flash and check it. >>>>>>>> >>>>>>>> >>>>>>>> What can be the probable issues which I can face in doing this as >>>>>>>> most of the header signals are shared on BBB? When I discussed this on >>>>>>>> TI >>>>>>>> community, I received a reply that eMMC chip in that case needs to be >>>>>>>> removed. Is it essential to Remove eMMC. Can't it be erased and then >>>>>>>> hardware lines used in parallel? Can other shared lines used on the >>>>>>>> expander head for GPMC also create problem. >>>>>>>> >>>>>>>> >>>>>>>> I want to use MUX1 or MUX2 XIP Boot Mode, 16 bit Address Data >>>>>>>> Multiplexed, with an OTP / Parallel NOR Flash booting. >>>>>>>> >>>>>>>> >>>>>>>> Kindly help as this will help me to reduce m design time and cost >>>>>>>> to a minimum. >>>>>>>> >>>>>>>> >>>>>>>> Regards. >>>>>>>> >>>>>>> -- >>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>> --- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "BeagleBoard" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to [email protected]. >>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>> >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> Gerald >>>>>> >>>>>> [email protected] >>>>>> http://beagleboard.org/ >>>>>> >>>>>> -- >>>>>> For more options, visit http://beagleboard.org/discuss >>>>>> --- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "BeagleBoard" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>> send an email to [email protected]. >>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> Mohit Hada (Proprietor) >>>>> >>>>> TECHNID SOLUTIONS >>>>> #7, 3rd Floor. >>>>> 73, Ashutosh Mukherjee Road. >>>>> Kolkata - 700025. >>>>> >>>>> Contact Details : 08820074382. >>>>> Web Address: www.technidsolutions.com >>>>> >>>>> -- >>>>> For more options, visit http://beagleboard.org/discuss >>>>> --- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "BeagleBoard" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to [email protected]. >>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>> >>>> >>>> >>>> -- >>>> Gerald >>>> >>>> [email protected] >>>> http://beagleboard.org/ >>>> >>>> -- >>>> For more options, visit http://beagleboard.org/discuss >>>> --- >>>> You received this message because you are subscribed to the Google >>>> Groups "BeagleBoard" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> >>> >>> >>> -- >>> Mohit Hada (Proprietor) >>> >>> TECHNID SOLUTIONS >>> #7, 3rd Floor. >>> 73, Ashutosh Mukherjee Road. >>> Kolkata - 700025. >>> >>> Contact Details : 08820074382. >>> Web Address: www.technidsolutions.com >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> >> >> -- >> Gerald >> >> [email protected] >> http://beagleboard.org/ >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > > > > -- > Mohit Hada (Proprietor) > > TECHNID SOLUTIONS > #7, 3rd Floor. > 73, Ashutosh Mukherjee Road. > Kolkata - 700025. > > Contact Details : 08820074382. > Web Address: www.technidsolutions.com > -- Mohit Hada (Proprietor) TECHNID SOLUTIONS #7, 3rd Floor. 73, Ashutosh Mukherjee Road. Kolkata - 700025. Contact Details : 08820074382. Web Address: www.technidsolutions.com -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
