say is it possible that I use the following signals of BBB:- - GPMC_AD[15..0] - GPMC_ALE - GPMC_CS0 - GPMC_OEn - GPMC_WEn - GPMC_WAIT0
and design my own custom cape with 16 bit NOR Flash in BB BLACK. Here there is a conflict on board with eMMC on BBB? Can I work around that ? Regards On Fri, Jun 26, 2015 at 7:00 PM, mohit hada <[email protected]> wrote: > Hi Gerald, > > Thanks for the reply. But can it be used with BBB or only with BB White? > > I have BBB and not BB White but I want to add something of this sort on it. > > Regards. > > On Fri, Jun 26, 2015 at 6:46 PM, Gerald Coley <[email protected]> > wrote: > >> Yes. There is a cape for adding memory and a NOR module. >> http://elinux.org/Beagleboard:BeagleBone_Capes >> >> >> Gerald >> >> On Fri, Jun 26, 2015 at 3:33 AM, mohit hada <[email protected]> wrote: >> >>> Read all the post as BBB instead of Beagle Bone Please. Thanks for >>> patience. >>> >>> >>> On Friday, 26 June 2015 13:24:36 UTC+5:30, mohit hada wrote: >>>> >>>> Hi, >>>> >>>> >>>> Can I do GPMC XIP parallel NOR boot using Beagle Bone by using the >>>> expansion headers of the beagle bone and making my own custom board for NOR >>>> / OTP Flash and check it. >>>> >>>> >>>> What can be the probable issues which I can face in doing this as most >>>> of the header signals are shared on BBB? When I discussed this on TI >>>> community, I received a reply that eMMC chip in that case needs to be >>>> removed. Is it essential to Remove eMMC. Can't it be erased and then >>>> hardware lines used in parallel? Can other shared lines used on the >>>> expander head for GPMC also create problem. >>>> >>>> >>>> I want to use MUX1 or MUX2 XIP Boot Mode, 16 bit Address Data >>>> Multiplexed, with an OTP / Parallel NOR Flash booting. >>>> >>>> >>>> Kindly help as this will help me to reduce m design time and cost to a >>>> minimum. >>>> >>>> >>>> Regards. >>>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> >> >> -- >> Gerald >> >> [email protected] >> http://beagleboard.org/ >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > > > > -- > Mohit Hada (Proprietor) > > TECHNID SOLUTIONS > #7, 3rd Floor. > 73, Ashutosh Mukherjee Road. > Kolkata - 700025. > > Contact Details : 08820074382. > Web Address: www.technidsolutions.com > -- Mohit Hada (Proprietor) TECHNID SOLUTIONS #7, 3rd Floor. 73, Ashutosh Mukherjee Road. Kolkata - 700025. Contact Details : 08820074382. Web Address: www.technidsolutions.com -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
