Jason, I just list low-volume prices from Avnet, available without a project registration. Pretty sure you have a better deal with Micron :)
2015-08-19 18:51 GMT+03:00 Jason Kridner <[email protected]>: > William, > > That sounds like some fuzzy math to me. I don't think a BOM increase > of $15 is a wash with removing the HDMI---and I didn't think removing > the HDMI was even an option to consider for the BeagleBone Black > itself. I do, however, feel Maxim's numbers are for fairly low-volume > purchases and I'd hope we could do better than that. > > Regards, > Jason > > On Wed, Aug 19, 2015 at 11:37 AM, William Hermans <[email protected]> > wrote: > > SO without the hdmi it sounds like price would be close to a wash. > > > > On Wed, Aug 19, 2015 at 8:36 AM, Maxim Podbereznyy <[email protected]> > > wrote: > >> > >> just to compare: 512M chip is ~7usd, 1GB chips is ~22usd. Think of the > >> extra value you get for the extra 512M > >> > >> 2015-08-19 18:34 GMT+03:00 William Hermans <[email protected]>: > >>>> > >>>> t'd be great to get feedback from the people on the list if they'd > >>>> pay for the extra $$ for 1GB if the 512MB stopped being available > >>>> (ie., Rev D vs. BeagleBone Black Gig). Supposedly the Sancloud folks > >>>> were going to make a 1-Gbyte-RAM + 1-Gbit-Ethernet version per > >>>> > >>>> > http://beagleboard.org/Community/Forums?place=msg%2Fbeagleboard%2FRoVnCt6EFDk%2FrjBJZZfcR2kJ > , > >>>> which was the only real reason we steered away from doing it > >>>> ourselves. They seem to have built some PCBs, but I feel it has been > >>>> quite a while in the waiting. > >>>> > >>>> Anyway, always good to get community feedback on our direction. > >>> > >>> > >>> You would have to give us a price first Jason.But also am confused as > to > >>> why it would be difficult to manufacture both. Not like you would have > to > >>> exactly "retool" . . . > >>> > >>> On Wed, Aug 19, 2015 at 8:22 AM, Jason Kridner < > [email protected]> > >>> wrote: > >>>> > >>>> It'd be great to get feedback from the people on the list if they'd > >>>> pay for the extra $$ for 1GB if the 512MB stopped being available > >>>> (ie., Rev D vs. BeagleBone Black Gig). Supposedly the Sancloud folks > >>>> were going to make a 1-Gbyte-RAM + 1-Gbit-Ethernet version per > >>>> > >>>> > http://beagleboard.org/Community/Forums?place=msg%2Fbeagleboard%2FRoVnCt6EFDk%2FrjBJZZfcR2kJ > , > >>>> which was the only real reason we steered away from doing it > >>>> ourselves. They seem to have built some PCBs, but I feel it has been > >>>> quite a while in the waiting. > >>>> > >>>> Anyway, always good to get community feedback on our direction. > >>>> > >>>> On Tue, Aug 18, 2015 at 11:22 PM, Gerald Coley < > [email protected]> > >>>> wrote: > >>>> > Green is the Seed Studio $39 special. > >>>> > > >>>> > It will cost more. If Jason approves the cost increase we can make > it > >>>> > happen > >>>> > on a Rev D board. > >>>> > > >>>> > X15 with 4GB would be nice. Try $40 more! I just want to see the 2G > >>>> > working > >>>> > first. > >>>> > > >>>> > Gerald > >>>> > > >>>> > > >>>> > On Tue, Aug 18, 2015 at 9:48 PM, William Hermans <[email protected] > > > >>>> > wrote: > >>>> >> > >>>> >> 1GB ram would be awesome on the BBB. > >>>> >> > >>>> >> So whats this "green initiative" ? Because an X15 with 4GB ram > would > >>>> >> be > >>>> >> very welcome too . . . I mean if you're paying ~$200 already, whats > >>>> >> another > >>>> >> 10-20 bux ? > >>>> >> > >>>> >> On Mon, Aug 17, 2015 at 6:22 AM, Gerald Coley > >>>> >> <[email protected]> > >>>> >> wrote: > >>>> >>> > >>>> >>> Well, I am not saying it is or it sin't. Words mean different > things > >>>> >>> to > >>>> >>> different people and if LOGO we an acronym, it could mean > anything! > >>>> >>> > >>>> >>> Gerald > >>>> >>> > >>>> >>> > >>>> >>> On Sun, Aug 16, 2015 at 10:21 PM, rh_ < > [email protected]> > >>>> >>> wrote: > >>>> >>>> > >>>> >>>> On Sun, 16 Aug 2015 09:58:34 -0500 > >>>> >>>> Gerald Coley <[email protected]> wrote: > >>>> >>>> > >>>> >>>> > A board without the beagleboard.org LOGO or BeagleBone Black > LOGO > >>>> >>>> > on > >>>> >>>> > it. > >>>> >>>> > > >>>> >>>> > In other words, one built by someone from the open source > >>>> >>>> > information > >>>> >>>> > and using their own assembly shop and their own testing > process. > >>>> >>>> > >>>> >>>> Thanks. I absolutely misread it as NoLgo and was not coming up > with > >>>> >>>> a > >>>> >>>> reasonable unraveling of the NoLgo acroynm. I thought Lgo was a > new > >>>> >>>> compound that is unhealthy that I had never heard of. Like > >>>> >>>> lead-free. > >>>> >>>> > >>>> >>>> -- > >>>> >>>> For more options, visit http://beagleboard.org/discuss > >>>> >>>> --- > >>>> >>>> You received this message because you are subscribed to the > Google > >>>> >>>> Groups "BeagleBoard" group. > >>>> >>>> To unsubscribe from this group and stop receiving emails from it, > >>>> >>>> send > >>>> >>>> an email to [email protected]. > >>>> >>>> For more options, visit https://groups.google.com/d/optout. > >>>> >>> > >>>> >>> > >>>> >>> > >>>> >>> > >>>> >>> -- > >>>> >>> Gerald > >>>> >>> > >>>> >>> [email protected] > >>>> >>> http://beagleboard.org/ > >>>> >>> > >>>> >>> -- > >>>> >>> For more options, visit http://beagleboard.org/discuss > >>>> >>> --- > >>>> >>> You received this message because you are subscribed to the Google > >>>> >>> Groups > >>>> >>> "BeagleBoard" group. > >>>> >>> To unsubscribe from this group and stop receiving emails from it, > >>>> >>> send an > >>>> >>> email to [email protected]. > >>>> >>> For more options, visit https://groups.google.com/d/optout. > >>>> >> > >>>> >> > >>>> >> -- > >>>> >> For more options, visit http://beagleboard.org/discuss > >>>> >> --- > >>>> >> You received this message because you are subscribed to the Google > >>>> >> Groups > >>>> >> "BeagleBoard" group. > >>>> >> To unsubscribe from this group and stop receiving emails from it, > >>>> >> send an > >>>> >> email to [email protected]. > >>>> >> For more options, visit https://groups.google.com/d/optout. > >>>> > > >>>> > > >>>> > > >>>> > > >>>> > -- > >>>> > Gerald > >>>> > > >>>> > [email protected] > >>>> > http://beagleboard.org/ > >>>> > > >>>> > -- > >>>> > For more options, visit http://beagleboard.org/discuss > >>>> > --- > >>>> > You received this message because you are subscribed to the Google > >>>> > Groups > >>>> > "BeagleBoard" group. > >>>> > To unsubscribe from this group and stop receiving emails from it, > send > >>>> > an > >>>> > email to [email protected]. > >>>> > For more options, visit https://groups.google.com/d/optout. > >>>> > >>>> -- > >>>> For more options, visit http://beagleboard.org/discuss > >>>> --- > >>>> You received this message because you are subscribed to the Google > >>>> Groups "BeagleBoard" group. > >>>> To unsubscribe from this group and stop receiving emails from it, send > >>>> an email to [email protected]. > >>>> For more options, visit https://groups.google.com/d/optout. > >>> > >>> > >>> -- > >>> For more options, visit http://beagleboard.org/discuss > >>> --- > >>> You received this message because you are subscribed to the Google > Groups > >>> "BeagleBoard" group. > >>> To unsubscribe from this group and stop receiving emails from it, send > an > >>> email to [email protected]. > >>> For more options, visit https://groups.google.com/d/optout. > >> > >> > >> > >> > >> -- > >> LinkedIn - http://www.linkedin.com/in/maximpodbereznyy > >> Company - http://www.linkedin.com/company/mentorel > >> Facebook - https://www.facebook.com/mentorel.company > >> > >> -- > >> For more options, visit http://beagleboard.org/discuss > >> --- > >> You received this message because you are subscribed to the Google > Groups > >> "BeagleBoard" group. > >> To unsubscribe from this group and stop receiving emails from it, send > an > >> email to [email protected]. > >> For more options, visit https://groups.google.com/d/optout. > > > > > > -- > > For more options, visit http://beagleboard.org/discuss > > --- > > You received this message because you are subscribed to the Google Groups > > "BeagleBoard" group. > > To unsubscribe from this group and stop receiving emails from it, send an > > email to [email protected]. > > For more options, visit https://groups.google.com/d/optout. > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- LinkedIn - http://www.linkedin.com/in/maximpodbereznyy Company - http://www.linkedin.com/company/mentorel Facebook - https://www.facebook.com/mentorel.company -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
