> On Aug 19, 2015, at 16:15 , William Hermans <[email protected]> wrote: > > Rick, > > Curious - What would you need a larger eMMC for ? I only ask because there > are workarounds for extra storage - sdcard, external USB etc.
My device is essentially a music player, but the nature of it makes it difficult to give the user access to the SD card slot. More than that, SD cards are notorious for their lack of reliability compared to the on-board eMMC. > As for wifi, how would you propose to physically connect one ? SPI ? UART ? > I2C ? Or maybe bit-bang custom software peripheral through the PRU's ? SPI. I wanted to put a TI WiLink module on my cape, so I got the existing Wi-Fi cape and tried it out. But it conflicts with the eMMC, because the SPI pins brought out on the connectors are the same ones used by the eMMC (I think I have that right). The Bluetooth side of that module uses a UART. > > On Wed, Aug 19, 2015 at 2:24 PM, Rick Mann <[email protected]> wrote: > I would pay extra for 1GB if that's all I could get, but more than that I > want more eMMC flash storage, which I would definitely pay for. While I'm > dreaming, I also want to be able to use eMMC and a non-USB Wi-Fi module at > the same time. > > > On Aug 19, 2015, at 08:22 , Jason Kridner <[email protected]> wrote: > > > > It'd be great to get feedback from the people on the list if they'd > > pay for the extra $$ for 1GB if the 512MB stopped being available > > (ie., Rev D vs. BeagleBone Black Gig). Supposedly the Sancloud folks > > were going to make a 1-Gbyte-RAM + 1-Gbit-Ethernet version per > > http://beagleboard.org/Community/Forums?place=msg%2Fbeagleboard%2FRoVnCt6EFDk%2FrjBJZZfcR2kJ, > > which was the only real reason we steered away from doing it > > ourselves. They seem to have built some PCBs, but I feel it has been > > quite a while in the waiting. > > > > Anyway, always good to get community feedback on our direction. > > > > On Tue, Aug 18, 2015 at 11:22 PM, Gerald Coley <[email protected]> > > wrote: > >> Green is the Seed Studio $39 special. > >> > >> It will cost more. If Jason approves the cost increase we can make it > >> happen > >> on a Rev D board. > >> > >> X15 with 4GB would be nice. Try $40 more! I just want to see the 2G working > >> first. > >> > >> Gerald > >> > >> > >> On Tue, Aug 18, 2015 at 9:48 PM, William Hermans <[email protected]> wrote: > >>> > >>> 1GB ram would be awesome on the BBB. > >>> > >>> So whats this "green initiative" ? Because an X15 with 4GB ram would be > >>> very welcome too . . . I mean if you're paying ~$200 already, whats > >>> another > >>> 10-20 bux ? > >>> > >>> On Mon, Aug 17, 2015 at 6:22 AM, Gerald Coley <[email protected]> > >>> wrote: > >>>> > >>>> Well, I am not saying it is or it sin't. Words mean different things to > >>>> different people and if LOGO we an acronym, it could mean anything! > >>>> > >>>> Gerald > >>>> > >>>> > >>>> On Sun, Aug 16, 2015 at 10:21 PM, rh_ <[email protected]> > >>>> wrote: > >>>>> > >>>>> On Sun, 16 Aug 2015 09:58:34 -0500 > >>>>> Gerald Coley <[email protected]> wrote: > >>>>> > >>>>>> A board without the beagleboard.org LOGO or BeagleBone Black LOGO on > >>>>>> it. > >>>>>> > >>>>>> In other words, one built by someone from the open source information > >>>>>> and using their own assembly shop and their own testing process. > >>>>> > >>>>> Thanks. I absolutely misread it as NoLgo and was not coming up with a > >>>>> reasonable unraveling of the NoLgo acroynm. I thought Lgo was a new > >>>>> compound that is unhealthy that I had never heard of. Like lead-free. > >>>>> > >>>>> -- > >>>>> For more options, visit http://beagleboard.org/discuss > >>>>> --- > >>>>> You received this message because you are subscribed to the Google > >>>>> Groups "BeagleBoard" group. > >>>>> To unsubscribe from this group and stop receiving emails from it, send > >>>>> an email to [email protected]. > >>>>> For more options, visit https://groups.google.com/d/optout. > >>>> > >>>> > >>>> > >>>> > >>>> -- > >>>> Gerald > >>>> > >>>> [email protected] > >>>> http://beagleboard.org/ > >>>> > >>>> -- > >>>> For more options, visit http://beagleboard.org/discuss > >>>> --- > >>>> You received this message because you are subscribed to the Google Groups > >>>> "BeagleBoard" group. > >>>> To unsubscribe from this group and stop receiving emails from it, send an > >>>> email to [email protected]. > >>>> For more options, visit https://groups.google.com/d/optout. > >>> > >>> > >>> -- > >>> For more options, visit http://beagleboard.org/discuss > >>> --- > >>> You received this message because you are subscribed to the Google Groups > >>> "BeagleBoard" group. > >>> To unsubscribe from this group and stop receiving emails from it, send an > >>> email to [email protected]. > >>> For more options, visit https://groups.google.com/d/optout. > >> > >> > >> > >> > >> -- > >> Gerald > >> > >> [email protected] > >> http://beagleboard.org/ > >> > >> -- > >> For more options, visit http://beagleboard.org/discuss > >> --- > >> You received this message because you are subscribed to the Google Groups > >> "BeagleBoard" group. > >> To unsubscribe from this group and stop receiving emails from it, send an > >> email to [email protected]. > >> For more options, visit https://groups.google.com/d/optout. > > > > -- > > For more options, visit http://beagleboard.org/discuss > > --- > > You received this message because you are subscribed to the Google Groups > > "BeagleBoard" group. > > To unsubscribe from this group and stop receiving emails from it, send an > > email to [email protected]. > > For more options, visit https://groups.google.com/d/optout. > > > -- > Rick Mann > [email protected] > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- Rick Mann [email protected] -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
