Hi, I am using ubuntu 14.04 (from Robert Nelson <https://rcn-ee.com/>) with a custom 3.15.10-bone8 kernel on Beaglebone Black. HDMI is disabled. When I plug the board to a PC, Beaglebone powers up but the PC does not recognize that a USB device is connected to it. I have installed the drivers for network-over-USB which is recommended on Beagleboard.org/getting-started too. Moreover, I cannot ssh into it using 192.168.7.2 eventhough I have set up my /etc/network/interfaces. ubuntu@arm $ ifconfig usb0 usb0 Link encap:Ethernet HWaddr d2:56:2f:23:1d:e2 inet addr:192.168.7.2 Bcast:192.168.7.3 Mask:255.255.255.252 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Is there some modules that I need to run or compile to Kernel to bring the client USB up? How should I configure the linux to be seen by PC when connected from mini USB? Thanks for any help. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
