Same Issue here. Il giorno venerdì 30 ottobre 2015 18:13:55 UTC+1, Alex ha scritto: > > Hi, > > I am using ubuntu 14.04 (from Robert Nelson <https://rcn-ee.com/>) with a > custom 3.15.10-bone8 kernel on Beaglebone Black. HDMI is disabled. > When I plug the board to a PC, Beaglebone powers up but the PC does not > recognize that a USB device is connected to it. I have installed the > drivers for network-over-USB which is recommended on > Beagleboard.org/getting-started too. Moreover, I cannot ssh into it using > 192.168.7.2 eventhough I have set up my /etc/network/interfaces. > ubuntu@arm $ ifconfig usb0 > usb0 Link encap:Ethernet HWaddr d2:56:2f:23:1d:e2 > inet addr:192.168.7.2 Bcast:192.168.7.3 Mask:255.255.255.252 > UP BROADCAST MULTICAST MTU:1500 Metric:1 > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) > > > Is there some modules that I need to run or compile to Kernel to bring the > client USB up? How should I configure the linux to be seen by PC when > connected from mini USB? > Thanks for any help. >
-- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
