Can you include the dmesg log? Are you sure br0 is how the adapter was named?
> On Nov 6, 2015, at 9:18 AM, [email protected] wrote: > > I'm trying to create a wi-fi hostspot using a beaglebone black rev-C and > DWA-131 nano wi-if adapter. > > I followed this article to install the driver: > http://www.linux-hardware-guide.com/2013-11-16-d-link-dwa-131-n300-usb-wifi-adapter > > And this project do setup the hostapd: https://github.com/jekader/hostapd-rtl > > But when I try to start I'm getting the following error: > > Configuration file: /etc/hostapd/hostapd.conf > drv->ifindex=4 > l2_packet_init: ioctl[SIOCGIFINDEX]: No such device > no br0 interface , let l2_sock_recv==l2_sock_xmit=0x0x51648 > ioctl[SIOCSIWMODE]: Operation not supported > Could not set interface to mode(3)! > Could not set interface to master mode! > rtl871xdrv driver initialization failed. > rmdir[ctrl_interface]: No such file or directory > My hostapd.conf is: > > interface=usb0 > driver=rtl871xdrv > bridge=br0 > ssid=NETWORK-NAME > channel=1 > wmm_enabled=0 > wpa=1 > wpa_passphrase=NETWORK-PASSWORD > wpa_key_mgmt=WPA-PSK > wpa_pairwise=TKIP > rsn_pairwise=CCMP > auth_algs=1 > macaddr_acl=0 > Hostapt version? Driver's name or config? > > ps: I'm not confortable because my network interface for the wi-fi is usb0 > instead of wlan0. Is a driver issue? > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
