Hi, I remove the brigde=br0, but the message still the same:
drv->ifindex=4 l2_sock_recv==l2_sock_xmit=0x0x51638 ioctl[SIOCSIWMODE]: Operation not supported Could not set interface to mode(3)! Could not set interface to master mode! rtl871xdrv driver initialization failed. The dmesg log is as attachment. Thanks On Friday, November 6, 2015 at 1:57:02 PM UTC-2, Jason Kridner wrote: > > Can you include the dmesg log? Are you sure br0 is how the adapter was > named? > > On Nov 6, 2015, at 9:18 AM, [email protected] <javascript:> wrote: > > I'm trying to create a wi-fi hostspot using a beaglebone black rev-C and > DWA-131 nano wi-if adapter. > > I followed this article to install the driver: > http://www.linux-hardware-guide.com/2013-11-16-d-link-dwa-131-n300-usb-wifi-adapter > > And this project do setup the hostapd: > https://github.com/jekader/hostapd-rtl > > But when I try to start I'm getting the following error: > > Configuration file: /etc/hostapd/hostapd.conf > drv->ifindex=4 > l2_packet_init: ioctl[SIOCGIFINDEX]: No such device > no br0 interface , let l2_sock_recv==l2_sock_xmit=0x0x51648 > ioctl[SIOCSIWMODE]: Operation not supported > Could not set interface to mode(3)! > Could not set interface to master mode! > rtl871xdrv driver initialization failed. > rmdir[ctrl_interface]: No such file or directory > > My hostapd.conf is: > > interface=usb0 > driver=rtl871xdrv > bridge=br0 > ssid=NETWORK-NAME > channel=1 > wmm_enabled=0 > wpa=1 > wpa_passphrase=NETWORK-PASSWORD > wpa_key_mgmt=WPA-PSK > wpa_pairwise=TKIP > rsn_pairwise=CCMP > auth_algs=1 > macaddr_acl=0 > > Hostapt version? Driver's name or config? > > ps: I'm not confortable because my network interface for the wi-fi is usb0 > instead of wlan0. Is a driver issue? > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected] <javascript:>. > For more options, visit https://groups.google.com/d/optout. > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
dmesg.log
Description: Binary data
