I'm trying to create a wi-fi hostspot using a beaglebone black rev-C and DWA-131 nano wi-if adapter.
I followed this article to install the driver: http://www.linux-hardware-guide.com/2013-11-16-d-link-dwa-131-n300-usb-wifi-adapter And this project do setup the hostapd: https://github.com/jekader/hostapd-rtl But when I try to start I'm getting the following error: Configuration file: /etc/hostapd/hostapd.conf drv->ifindex=4 l2_packet_init: ioctl[SIOCGIFINDEX]: No such device no br0 interface , let l2_sock_recv==l2_sock_xmit=0x0x51648 ioctl[SIOCSIWMODE]: Operation not supported Could not set interface to mode(3)! Could not set interface to master mode! rtl871xdrv driver initialization failed. rmdir[ctrl_interface]: No such file or directory My hostapd.conf is: interface=usb0 driver=rtl871xdrv bridge=br0 ssid=NETWORK-NAME channel=1 wmm_enabled=0 wpa=1 wpa_passphrase=NETWORK-PASSWORD wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP rsn_pairwise=CCMP auth_algs=1 macaddr_acl=0 Hostapt version? Driver's name or config? ps: I'm not comfortable because my network interface for the wi-fi is usb0 instead of wlan0. Is a driver issue? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
