Team,
Our customer is trying to utilize the Beaglebone Black, running Python scripts, to program the SimpleLink CC3200 <http://www.ti.com/product/CC3200> . Can you answer a question at the bottom of the attached reference document? (“We could not find documentation on how to run python scripts on beaglebone-black (Linux) like it has mentioned for Windows. It would be helpful if we can get this information.”) In other words, what is the command line to run the script on BBB (like “ImageProgramming.exe -p 2 -i hib.bin” on Windows)? Regards, Chris ----- Questions regarding Embedded Programming 1. We are able to program the evaluation board by connecting it to PC via USB. Results are as follows. <https://lh3.googleusercontent.com/-A7rqDpomlb8/VmAynWMVkYI/AAAAAAAAAC4/YB7Zv_6_FHs/s1600/ICM%2B1.png> <https://lh3.googleusercontent.com/-54UYwQ19zrg/VmAyrhCog1I/AAAAAAAAADA/UBdziwe_tnA/s1600/ICM%2B2.jpg> 2. But when we tried to program the evaluation board by using RS232 to TTL converter, we were unsuccessful, screen shot of Command Prompt and Snap shot of the setup are as below. <https://lh3.googleusercontent.com/-6pp9-KFd0hM/VmAyvvmgdvI/AAAAAAAAADI/Yd7xCdXSBHk/s1600/ICM%2B3.png> <https://lh3.googleusercontent.com/-3iS8egRDsr4/VmAyzRUBBYI/AAAAAAAAADQ/Lgv9ZbQLEI0/s1600/ICM%2B4.jpg> 3. We could not find documentation on how to run python scripts on beaglebone-black (Linux) like it has mentioned for Windows. It would be helpful if we can get those information. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
