http://processors.wiki.ti.com/index.php/Sitara_ARM_MPU_SOM/SBC
On Sat, Dec 5, 2015 at 7:42 AM, Bill Pretty <[email protected]> wrote: > Not as far as I know. > > > > When I built my first 6 node super cluster I used a 9 port 10/100 switch. > > And built my own power distribution setup. > > > > *From:* [email protected] [mailto:[email protected]] > *On Behalf Of *Nathaniel Firethorn > *Sent:* Saturday, December 05, 2015 8:51 AM > *To:* BeagleBoard > *Subject:* [beagleboard] Beagle backplane - does one exist? Can one exist? > > > > Hi, all, > > I'm interested in either locating or designing a test system architecture > using inexpensive and physically robust modules. My requirements: > > - Modular architecture in which test interface boards can be plugged > into a backplane or similar hardware structure. > - Up to 10 boards per backplane > - Physically robust > - Inexpensive > - Reasonably high data rates along the backplane (high resolution > digital video) > - Interface boards need to be designed to support: > > > - Ethernet at up to about 100 MBPS rates > - USB to video rates > - RS485 with arbitrary data link layer protocols > > VXI will support all these requirements except the "inexpensive." > > > > I'm not new to SW or HW architecture, but I am new to Beagle and Raspberry > Pi. > > > > Has anyone commercialized something like this, or am I barking up the > wrong tree? > > > > Thanks, > > - NF. > > > > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
