Hmmmm... I see card edge fingers on a number of those modules. Is there a standard bus?
On Saturday, December 5, 2015 at 11:12:17 AM UTC-5, William Hermans wrote: > > http://processors.wiki.ti.com/index.php/Sitara_ARM_MPU_SOM/SBC > > On Sat, Dec 5, 2015 at 7:42 AM, Bill Pretty <[email protected] > <javascript:>> wrote: > >> Not as far as I know. >> >> >> >> When I built my first 6 node super cluster I used a 9 port 10/100 switch. >> >> And built my own power distribution setup. >> >> >> >> *From:* [email protected] <javascript:> [mailto: >> [email protected] <javascript:>] *On Behalf Of *Nathaniel >> Firethorn >> *Sent:* Saturday, December 05, 2015 8:51 AM >> *To:* BeagleBoard >> *Subject:* [beagleboard] Beagle backplane - does one exist? Can one >> exist? >> >> >> >> Hi, all, >> >> I'm interested in either locating or designing a test system architecture >> using inexpensive and physically robust modules. My requirements: >> >> - Modular architecture in which test interface boards can be plugged >> into a backplane or similar hardware structure. >> - Up to 10 boards per backplane >> - Physically robust >> - Inexpensive >> - Reasonably high data rates along the backplane (high resolution >> digital video) >> - Interface boards need to be designed to support: >> >> >> - Ethernet at up to about 100 MBPS rates >> - USB to video rates >> - RS485 with arbitrary data link layer protocols >> >> VXI will support all these requirements except the "inexpensive." >> >> >> >> I'm not new to SW or HW architecture, but I am new to Beagle and >> Raspberry Pi. >> >> >> >> Has anyone commercialized something like this, or am I barking up the >> wrong tree? >> >> >> >> Thanks, >> >> - NF. >> >> >> >> >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] <javascript:>. >> For more options, visit https://groups.google.com/d/optout. >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] <javascript:>. >> For more options, visit https://groups.google.com/d/optout. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
