Hi, In continue to my IRC chat with rcn-ee, I need more help to figure this out. I am using a beaglebone green and the lxqt image and kernel 4.1.13-ti-r35 . I want to use the on-board button connected to P8_43, so I need to setup pull up for this gpio. I also want to use the analog to digital converter (ADC) to sample an input.
The universal cape used to load on boot, and I used to use config-pin P8_43 in+ to setup. rcn-ee askd me to git pull in /opt/scripts, which I did, and I also ran apt-get upgrade on the full OS. Now after boot when I try to run config-pin P8_43 in+ I get this error: cape-universala overlay not found run "config-pin overlay cape-universala" to load the cape Yet /lib/firmware/ has no file named cape-universala-00A0.dtbo. 1. So my first question is how to allow the use of config-pin after this upgrade. 2. How to load the ADC device tree and module? seems config-pin overlay BB-ADC is ok, but should I load it after the universal cpae? Thanks, Niv -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
