I also did the git pull in the overlays directory and the ./intsall.sh, but the cape-universala overlay did not appear in the /lib/firmware directory. I searched the whole repository and as far as I can see an overlay with the name cape-universala has never existed. Any ideas how to resolve this?
On Thursday, January 28, 2016 at 12:43:50 PM UTC+1, Greg wrote: > > I don't see any difference. When I use the command git pull, the command >> line response is "Already up-to-date.". >> > > I had already removed the bb.org-overlays directory and git cloned from > git clone https://github.com/beagleboard/bb.org-overlays > > After ./install.sh, I see the same dtbo files in /lib/firmware. > > Are you sure "git pull" is all that is required? > > Another question I have on this overlay system: What determines the > overlay which is loaded at boot? > Is there another influence besides the uEnv.txt file? > A cape board can have an EEPROM which describes the overlay to apply. > I know there is also an EEPROM on the BBB as well. Does this one also > contain a default overlay which > is loaded in the case of no cape? > > Regards, > Greg > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
