On Wed, Apr 27, 2016 at 1:49 PM, Sriram Chadalavada <[email protected]> wrote:
> I did have a serial debug cable connected :). Turned out the right angle > serial connector between the cable and the J1 went bad. > > But the BBB seems to be booting into the default debian in the eMMC rather > than the Ubuntu programmed into the microSD card using netinstall. > > Here's the output: > > U-Boot 2015.01-00001-gb2412df (Jan 29 2015 - 15:01:06), Build: > jenkins-github_B5 > > Watchdog enabled > I2C: ready > DRAM: 512 MiB > MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 > Using default environment > Net: <ethaddr> not set. Validating first E-fuse MAC > cpsw > > > Is the SD card being recognized correctly by uboot? > boot into the eMMC and: sudo dd if=/dev/zero of=/dev/mmcblk0 bs=1M count=10 u-boot gone from the eMMC ;) Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYg9OaOyVmicauY3oX_AK0WDTJ0EQiDep6e2F6YhHPd%2BGQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
