On Wed, Apr 27, 2016 at 1:55 PM, Robert Nelson <[email protected]> wrote:
> > > On Wed, Apr 27, 2016 at 1:49 PM, Sriram Chadalavada <[email protected]> > wrote: > >> I did have a serial debug cable connected :). Turned out the right angle >> serial connector between the cable and the J1 went bad. >> >> But the BBB seems to be booting into the default debian in the eMMC >> rather than the Ubuntu programmed into the microSD card using netinstall. >> >> Here's the output: >> >> U-Boot 2015.01-00001-gb2412df (Jan 29 2015 - 15:01:06), Build: >> jenkins-github_B5 >> >> Watchdog enabled >> I2C: ready >> DRAM: 512 MiB >> MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 >> Using default environment >> Net: <ethaddr> not set. Validating first E-fuse MAC >> cpsw >> >> >> Is the SD card being recognized correctly by uboot? >> > > boot into the eMMC and: > > sudo dd if=/dev/zero of=/dev/mmcblk0 bs=1M count=1 > > u-boot gone from the eMMC ;) > > I could do that but if it truly isn't recognizing the microSD, wouldn't formatting eMMC render it non-usable? I'm not that familiar with BBB, have not played around with U-boot off late nor have JTAG etc , so would rather not take a chance. Did the output indicate that the microSD is NOT being recognized? Thanks! Regards, > -- > Robert Nelson > https://rcn-ee.com/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/GyKN6K8esa0/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/CAOCHtYg9OaOyVmicauY3oX_AK0WDTJ0EQiDep6e2F6YhHPd%2BGQ%40mail.gmail.com > <https://groups.google.com/d/msgid/beagleboard/CAOCHtYg9OaOyVmicauY3oX_AK0WDTJ0EQiDep6e2F6YhHPd%2BGQ%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOK2joH0VFRe4XnGC6JWRL7xkZPze0zOvzSh_4fNNGaRBkpNtA%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
