On Wed, Apr 27, 2016 at 2:04 PM, Sriram Chadalavada <[email protected]> wrote:
> > > On Wed, Apr 27, 2016 at 1:55 PM, Robert Nelson <[email protected]> > wrote: > >> >> >> On Wed, Apr 27, 2016 at 1:49 PM, Sriram Chadalavada <[email protected]> >> wrote: >> >>> I did have a serial debug cable connected :). Turned out the right angle >>> serial connector between the cable and the J1 went bad. >>> >>> But the BBB seems to be booting into the default debian in the eMMC >>> rather than the Ubuntu programmed into the microSD card using netinstall. >>> >>> Here's the output: >>> >>> U-Boot 2015.01-00001-gb2412df (Jan 29 2015 - 15:01:06), Build: >>> jenkins-github_B5 >>> >>> Watchdog enabled >>> I2C: ready >>> DRAM: 512 MiB >>> MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 >>> Using default environment >>> Net: <ethaddr> not set. Validating first E-fuse MAC >>> cpsw >>> >>> >>> Is the SD card being recognized correctly by uboot? >>> >> >> boot into the eMMC and: >> >> sudo dd if=/dev/zero of=/dev/mmcblk0 bs=1M count=1 >> >> u-boot gone from the eMMC ;) >> >> I could do that but if it truly isn't recognizing the microSD, wouldn't > formatting eMMC render it non-usable? I'm not that familiar with BBB, have > not played around with U-boot off late nor have JTAG etc , so would rather > not take a chance. Did the output indicate that the microSD is NOT being > recognized? Thanks! > Nope, you cut it off too early.. Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYgivOpD4q%2BB_j37cU_y4GpDK%3DQxkJQj1z88iYEX48XJZg%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
