On Thu, May 26, 2016 at 6:18 PM, Jacek Radzikowski < [email protected]> wrote:
> Hello, > > Following instructions from > http://elinux.org/BeagleBoardDebian#Debian_NetInstall I built an SD > card for Beagleboard rev C3. The build went smoothly, the board booted > to u-boot, but all activity ceases after the system attempts to load > ramdisk image. > The board is powered from an external 5V/2A power supply, and the boot > disk has been built using the following command: > sudo ./mk_mmc.sh --mmc /dev/sdh --dtb omap3-beagle --distro jessie > --serial-mode > > Boot log from serial terminal in the attached file. > > Is the original Beagleboard still supported by current debian builds? > So, i'm pretty sure this is a u-boot bug... 2 week ago, i tried bisecting from v4.6.x to all my old releases down to v3.14.x.. None booted.. The bb-xm jessie image posted here, does work: http://beagleboard.org/latest-images Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYiAy-BuDYyAuzoPdmjNgS%2BZNcZ2eD8hG6vVCnwWEuxOKw%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
