Jacek Radzikowski <jacek.radzikowski@...> writes: > > Which image do you recommend? I checked > beaglexm-debian-8.3-console-2016-02-11-2gb.img, with similar result > > Jacek > > On Thu, May 26, 2016 at 7:26 PM, Robert Nelson > <robertcnelson@...> wrote: > > > > > > On Thu, May 26, 2016 at 6:18 PM, Jacek Radzikowski > > <jacek.radzikowski@...> wrote: > >> > >> Hello, > >> > >> Following instructions from > >> http://elinux.org/BeagleBoardDebian#Debian_NetInstall I built an SD > >> card for Beagleboard rev C3. The build went smoothly, the board booted > >> to u-boot, but all activity ceases after the system attempts to load > >> ramdisk image. > >> The board is powered from an external 5V/2A power supply, and the boot > >> disk has been built using the following command: > >> sudo ./mk_mmc.sh --mmc /dev/sdh --dtb omap3-beagle --distro jessie > >> --serial-mode > >> > >> Boot log from serial terminal in the attached file. > >> > >> Is the original Beagleboard still supported by current debian builds? > > > > > > So, i'm pretty sure this is a u-boot bug... > > > > 2 week ago, i tried bisecting from v4.6.x to all my old releases down to > > v3.14.x.. None booted.. > > > > The bb-xm jessie image posted here, does work: > > > > http://beagleboard.org/latest-images > > > > Regards, > > > > -- > > Robert Nelson > > https://rcn-ee.com/ >
Hello, I am also having this exact same issue. Installed the 2016-02-11 image from http://beagleboard.org/latest-images (https://debian.beagleboard.org/images/) as suggested, got stopped at loading the ramdisk, just like you. Waited 15 minutes before assuming nothing was going to happen. Then I tried the 2016-06-09 image from https://rcn-ee.com/rootfs/2016-06- 09/microsd/ (which I believe is Robert's personal website) Same thing, stuck at "Loading Ramdisk to 8f5da000, end 8ffff61c ..." ("8f6ac000, end 8ffff105" for the 2016-02-11 image) According to archive.org the 2016-02-11 was the first and only copy that ever existed. Did Robert ever get back to you with a suggestion? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/loom.20160725T003739-294%40post.gmane.org. For more options, visit https://groups.google.com/d/optout.
