On Sun, Jul 24, 2016 at 7:02 PM, David Goldsmith <[email protected]> wrote: > Jacek Radzikowski <jacek.radzikowski@...> writes: > >> >> Which image do you recommend? I checked >> beaglexm-debian-8.3-console-2016-02-11-2gb.img, with similar result >> >> Jacek >> >> On Thu, May 26, 2016 at 7:26 PM, Robert Nelson >> <robertcnelson@...> wrote: >> > >> > >> > On Thu, May 26, 2016 at 6:18 PM, Jacek Radzikowski >> > <jacek.radzikowski@...> wrote: >> >> >> >> Hello, >> >> >> >> Following instructions from >> >> http://elinux.org/BeagleBoardDebian#Debian_NetInstall I built an SD >> >> card for Beagleboard rev C3. The build went smoothly, the board booted >> >> to u-boot, but all activity ceases after the system attempts to load >> >> ramdisk image. >> >> The board is powered from an external 5V/2A power supply, and the boot >> >> disk has been built using the following command: >> >> sudo ./mk_mmc.sh --mmc /dev/sdh --dtb omap3-beagle --distro jessie >> >> --serial-mode >> >> >> >> Boot log from serial terminal in the attached file. >> >> >> >> Is the original Beagleboard still supported by current debian builds? >> > >> > >> > So, i'm pretty sure this is a u-boot bug... >> > >> > 2 week ago, i tried bisecting from v4.6.x to all my old releases down to >> > v3.14.x.. None booted.. >> > >> > The bb-xm jessie image posted here, does work: >> > >> > http://beagleboard.org/latest-images >> > >> > Regards, >> > >> > -- >> > Robert Nelson >> > https://rcn-ee.com/ >> > > > Hello, > I am also having this exact same issue. Installed the 2016-02-11 image from > http://beagleboard.org/latest-images (https://debian.beagleboard.org/images/) > as suggested, got stopped at loading the ramdisk, just like you. Waited 15 > minutes before assuming nothing was going to happen. > Then I tried the 2016-06-09 image from https://rcn-ee.com/rootfs/2016-06- > 09/microsd/ (which I believe is Robert's personal website) > Same thing, stuck at "Loading Ramdisk to 8f5da000, end 8ffff61c ..." > ("8f6ac000, end 8ffff105" for the 2016-02-11 image) > According to archive.org the 2016-02-11 was the first and only copy that ever > existed. > Did Robert ever get back to you with a suggestion?
No. I'm assuming the original Beabgleboard is no longer actively supported. Jacek -- Given a choice between two theories, take the one which is funnier -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAA2oDva8i1MygDXVgMnAXPkXoOMdUAQCPO1HGvuLaKmVwrWA%2BQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
