IT seems that whenever I enable the UARTs I cannot enable the appropriate digital i/o pins
ie I do this in uEnv.txt cape_enable=bone_capemgr.enable_partno= PyBBIO-gpio2_2,BB-UART1,BB-UART2,BB-UART4 On Friday, June 10, 2016 at 6:11:09 PM UTC-4, [email protected] wrote: > > Thank you for the pointer. I'll look for the name of the i/o pin I'm using > and enable that manually. > > -James > > On Friday, June 10, 2016 at 6:07:57 PM UTC-4, RobertCNelson wrote: >> >> On Fri, Jun 10, 2016 at 5:05 PM, <[email protected]> wrote: >> > I believe I have found the problem. I need to get both the UART and the >> > digital I/o pins enabled at the same time in the device tree, however >> when I >> > edit uEnv.txt to enable the UART in the usual manner, universal i/o is >> no >> > longer enabled, I am trying to explicitly enable that as well as the >> UART1. >> > I'll keep you all posted. Advice on this is also highly appreciated. >> >> universal i/o will disable it self, if you force something else via >> cape_enable in /boot/uEnv.txt >> >> Regards, >> >> -- >> Robert Nelson >> https://rcn-ee.com/ >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/458dbea4-982a-48d5-8e50-32748fedd4c5%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
