>
> Wally Bkg:
>
thanks! i'll look it up.
Dennis Lee Bieber:
thanks! i have managed to establish a serial connection with the PC via
RS-232,
the code was written in cloud 9 in Python, it was fairly easy and didn't
took too long.
my goal is to read serial data from an IMU that sends packets of data in a
high speed and make stabilization program for 2 motors.
it doesn't need it to be super fast, it needs to update at around 20-30
times a second tops.
TJF:
thanks for the tip! i already know the basics of serial communication but i
haven't used in in an actual system.
so for the needs i specified for Dennis do you think that python will be
ok? or should i use c++?
it's just that in python it's super easy and in C everything is over
complicated, especially for a beginner like me.
what do you recommend i should do? learning to program serial in C might be
hard and annoying compared to python.
thanks for everybody for answering! :) you are very helpful!
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/58dbbf8b-118d-47c0-ac85-be26ba942673%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
